Hitachi KP-F500WCL 5 Megapixel Black & White Gigabit Ethernet Camera
Industrial Video System & Broadcast
Hitachi : KP-F500WCL
Description
The Hitachi KP-F500WCL is a CameraLink output system progressive scan black and white CCD camera with a 2/3-inch size CCD and a full frame shutter.
The image of 2456 (H) x 2058 (V) is output at 16 frames per second. The square lattice pixel format also provides excellent suitability for image processing applications.
Features
→ 2/3″ Format 5.05M Pixel CCD
→ 2456 x 2058 Effective Pixels
→ 3.45 x 3.45 µm square pixels
→ 5 : 4 Aspect Ratio
→ 400lux @ f5.6
→ CameraLink Output,
→ 8, 10, or 12 Bits / Pixel
→ 16 Frames / Second
→ Power Input: External Power or PoCL Auto Selection for Power
→ Frame-on-Demand Mode, Partial Scan Mode
→ 1/16 to 1/50,000 Electronic Shutter
→ 3.1Watts of Power Consumption
→ 44(W) x 44(H) x 41(D) mm
→ RoHS Compliant
Specifications
| Imaging device | 2/3-inch interline CCD |
| Total pixels | 2536 (H) x 2068 (V) |
| Effective pixels | 2456 (H) x 2058 (V) |
| Pixel size | 3.45 µm (H) x 3.45 µm (V) (square lattice) |
| Sensing area | 8.47 mm (H) x 7.10 mm (V) |
| Scanning system | Progressive |
| Aspect ratio | 5:4 |
| Frame rate | 16 frames/second (full pixel readout) |
| Horizontal drive frequency | 64.0000 MHz |
| Horizontal scanning frequency | 33.264 kHz |
| Vertical scanning frequency | 16.00 Hz (full pixel readout) |
| Sync system | Internal |
| Lens mount | C mount |
| Flange focal distance | 17.526 mm |
| Video output | Digital output (CameraLink) Base configuration: 64.0000 MHz x 2TAP Medium configuration: 32.0000 MHz x 4TAP Maximum cable length: 10m Output image size: 2456(H) x 2058(V) (full pixel readout) |
| Resolution | Horizontal/Vertical: 2000 TV lines |
| Sensitivity | 500lx, F11, 3200K |
| Minimum illumination | 1.0lx (F1.4 MAX GAIN) |
| Signal noise to ratio | 48dB |
| Electric shutter | OFF 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/100000 second) |
| Gamma | γ = 1 |
| Frame on demand | Mode: (A) Fixed shutter (8 steps or variable) (B) ONE trigger mode (C) VD reset mode Trigger input: CameraLink (CC1) or DCIN/SYNC connector |
| Partial scan | Selectable start position and width of picture grabbing in 1H step. |
| Power supply voltage | 12 ± 1 VDC |
| Current consumption | Approx. 260 mA (Approx. 3.1W) *MAX partial scan 1H: Approx. 330 mA (Approx. 4.0W) |
| Ambient | Performance: 0 to 40℃ ( 32 to 104 F), less than 90 % RH Operation: -10 to 50℃ ( 14 to 122 F), less than 90 % RH Storage: -20 to 60℃ (-4 to 140 F), less than 70 % RH (without dew condensation) |
| Vibration endurance | 10 to 55 Hz (2.37 to 71.7 m/s2), sweep: 1 min XYZ 30min |
| Shock endurance | 490.3 m/s2 (Drop test, once each top, bottom, left and right) |
| External dimensions | 44 (W) x 44 (H) x 41 (D) mm (Not including mount protrusions) |
| Mass | Approx. 110 g |